ASB series

Inquire product

The 120 – 344 litre front loading autoclave offers five chamber sizes, increased in capacity from the top loading range. The ‘Swiftlock’ front loading range of autoclaves allows the user a greater choice of options unavailable on the smaller ranges, as well as easy loading access.
Astell’s additional options include Integral Steam Generators, Heated Jackets, Simple/Advanced Vacuum and a choice of Cooling options to name but a few.

  • 316 stainless steel electropolished chamber
  • A choice of 120, 153, 247, 290 and 344 litres models
  • Calibration and Validation available
  • FDA 21 CFR part 11 software option available
  • Cooling Lock
  • External pressure guage
  • Five password levels to stop lower level users making changes
  • Holdwarm / Delayed Start feature
  • Optimised for low water and power consumption
  • Over Temperature Protection
  • Standard Astell safety features
  • Timed/Pulsed Free Steaming
  • Fully programmable 5.7" Colour Touch Screen controller
  • USB interface for downloading controller data
Additional options
  • Load Sensed Process Timing
  • Pulsar Freesteaming
  • Integral data printer
  • FDA 21 CFR part 11 controller software
  • Remote maintenance/diagnosis
  • Ethernet interface
  • IQ/OQ documentation
  • Assisted air cooling/non jacketed
  • Advanced water cooling
  • Autodrain (heaters in chamber models only)
  • Autofill (heaters in chamber models only)
  • Air ballast (requires compressed air)
  • Internal convection cooling
  • Drain Cooling (heaters in chamber model only)
  • Category III (BSL-3) compliance
  • Morrison discard container (W:280 x H:290 x D:330mm)
  • Container tray (W:279 x H:127 x D:279mm)
  • Additional shelf kit (for ASB260/ASB270)
  • Additional shelf kit (for ASB280/ASB290/ASB300)
  • Water softener (compact)
  • Integral air compressor (req. for Vacuum units)
  • Blow down vessel (steam gen. only)
  • Direct Steam model
Installation requirements

Power requirements: The power requirements for the standard machines are listed in the Specifications table, however these can vary depending on the
options selected. Options that affect the power requirement are Integral Steam Generator and Advanced and Simple Vacuum.
For details on the exact power requirements on these options please contact us. N.B. A Neutral line and protective Earth are
required for all electrically heated units.
Water and drainage requirements: A cold water supply of 2-6 Bar minimum, 4 litres/min is required for the ‘Autofill’, vacuum and water cooling options. Max temperature
25°C, Max flow rate 20 litres/min. Requirements vary for RO/de-ionised/hard water. Drainage: Free venting, non-manifolded drain
(35mm diameter) capable of withstanding temperatures up to 100°C.


Let's get to know each other

Would you like to purchase one of our products, do you have any question about a product or about services or do you need further information?

We are always just one phone call away or you can send us a message here