GB210A – Versatile Mini Spray Dryer

Inquire product

The GB210A spray drying unit is versatile and compact ideal for performing a range of applications from preliminary experiments in a pilot plant to drying work in general laboratories.

Spray drying equipment has improved over the years. Today, you can process products from milk powder to antibiotics using spray dryers. Our spray dryer models are suitable for experimental and R&D purposes. You can use our spray dryers for drying, fine powdering, powder mixing, agglomerating, encapsulating, and englobing.

The GB210A Spray dryer is a compact and versatile spray dryer that can easily produce powder on a laboratory scale. The GB210A spray dryer unit is capable of drying ultra small samples as low as 30ml of sample and can spray dry it into fine powder 1μm to 25μm in size. Moreover, our versatile GB210A compact spray dryer can perform a variety of applications from preliminary experiments in a pilot plant to drying work in general laboratories.

True to providing convenience and efficiency to our users, the GB210A spray dryer model employs a one-touch removal system that makes removal and cleaning of the drying chamber, cyclone, and product container much easier.

  • Samples unstable at high temperatures can be reliably processed into fine powder. Heat is applied instantly and indirectly to the powder itself
  • Prepared fine powder will not be oxidized in the spray dryer, contains minimal moisture and is contaminant-free
  • Direct drying from solution/suspension liquid to fine powder with a reduced risk of contamination
  • No pre or post processes such as filtration, separation, or pulverization are required
  • Processing of samples containing organic solvents is made possible by connecting the Organic Solvent Recovery Unit GAS410 to the spray dryer
  • Spray dryer unit can also be used as a fluid bed drying granulator by installing a separate mini bed attachment GF200 instead of GF300 spray drying attachment
  • An automatic lift is equipped as standard to enable easy installation or removal of glass drying chamber attachment
  • A service outlet (max. 2A) and a sample stand are equipped as standard for connecting a magnetic mixer for stirring suspended liquid sample
  • Stable spray drying using a unique peristaltic pump, nozzle cooling mechanism, pulse jet mechanism and a nozzle knocker enable stable spray drying
Applications
  • - Commercial Food Products
  • - Pharmaceutical Products
  • - Industrial Products
Technical specifications
Spraying system: Two-way nozzle, Nozzle No. 1A as standard
Temp. adjusting unit setting range: 40 to 220°C (inlet temperature), 0 to 98°C (outlet temperature)
Temperature adjusting accuracy: Inlet temperature ±1°C
Drying air amount adjusting range: 0 to 0.7 m³/min
Spray air pressure adjusting range: 0 to 0.3 MPa
Liquid sending pump flow rate range: 0 to 26 mL/min
External output: Inlet temperature, outlet temperature, temperature outlet (4-20 mA)
Touch panel: Blower, heater, liquid sending pump, pulse jet switch, error display
Heater: 2.0 kW (at 200V) to 2.88 kW (at 240V)
Exterior dimensions (WxDxH): 760 x 420 x 1350 mm
Weight: 110kg
Power supply: (50/60Hz) rated current AC220V 17A AC240V 18A, Switching of terminals necessary
Included accessories: Silicon tube (with a stopper) x 3, tiron tube (with a stopper) x 2 exhaust duct (with one hose band) x 1, outlet temperature sensor, spray air tube, sample box, static electricity removal earth, Teflon braided hose 5m (with two hose bands), a container table

Let's get to know each other

Would you like to purchase one of our products, do you have any question about a product or about services or do you need further information?

We are always just one phone call away or you can send us a message here